Active Heave Compensation
How a crane holds a load steady while the ship moves: passive and active compensation, the motion reference unit, the control loop and the operability it buys.
Heave compensation decouples a suspended load from the vertical motion of the ship carrying the crane. Without it, a load landed on a seabed structure or on another vessel arrives with the ship’s heave velocity added to the hoist speed, and the resulting impact and snap loads set the sea state in which work can be attempted.
The full article will separate the two approaches. Passive compensation uses a gas spring or accumulator in the load path to soften the coupling, requires no power and no sensing, and reduces rather than removes the motion. Active compensation measures the vessel’s vertical motion with a motion reference unit and drives the hoist winch to cancel it, holding the load at a constant absolute height, which needs installed power, a fast drive and a control loop that stays stable as the load and the wire length change.
It will cover the practical limits: the compensation stroke and speed available, the difference between compensating at the crane tip and compensating at the hook, the behaviour through the splash zone where the load’s own added mass changes rapidly, and the point at which the drive saturates and the system hands the sea state back to the operator.