Bump Testing and Gas Detector Calibration
The maintenance regime behind SOLAS XI-1/7: bump test against span calibration, span gas, intervals, and what a port state control officer asks to see.
SOLAS regulation XI-1/7 requires that suitable means shall be provided for the calibration of the portable atmosphere testing instruments a ship carries. The regulation does not set an interval. MSC.1/Circ.1477 paragraphs 16 and 17 leave the interval to the manufacturer, but require that any calibration-interval alarm or shutdown must not stop the instrument functioning during actual use, and that the unit must not restart once that alarm has activated.
The full article will distinguish the two operations that are routinely conflated. A bump test is a functional check that exposes each sensor to a known gas and confirms the instrument responds and alarms; it proves the instrument is alive. A span calibration adjusts the instrument’s reading against a certified concentration of span gas; it proves the instrument is accurate. A bump test is not a calibration and does not extend a calibration interval.
The article will also cover span gas cylinders and their shelf life aboard, zeroing in fresh air against zeroing on nitrogen, the record a surveyor or port state control officer asks for, and the sensor service lives that decide when calibration stops being possible and replacement begins.