Catalytic Bead and Electrochemical Gas Sensors

Sensor physics for the practitioner: pellistor oxygen dependence, silicone and halogen poisoning, electrochemical cell service life, and infrared alternatives.

The order in which a ship’s atmosphere is tested follows from how the sensors work. A catalytic bead sensor, or pellistor, measures flammable gas by oxidising the sample on a heated catalytic element and detecting the resistance change from the heat of combustion. It needs oxygen in the sample to do that, so in an oxygen-depleted atmosphere it under-reads and can indicate zero while flammable gas is present. MSC.581(110) paragraph 7.1 answers the problem as an equipment requirement, calling for gas detection equipment capable of operating correctly even in an oxygen-depleted atmosphere.

The full article will cover the three sensor families found in shipboard multi-gas instruments: catalytic bead for flammables, electrochemical cells for oxygen and for toxic gases including carbon monoxide and hydrogen sulphide, and non-dispersive infrared for hydrocarbons and carbon dioxide. Each has a different failure mode and a different service life.

It will also cover poisoning and inhibition, since a pellistor is degraded permanently by silicones and by halogenated compounds and gives no indication that it has been, and the cross-sensitivities that make an electrochemical cell read a gas it was not calibrated for.