Crane Classification and Duty Groups

What a crane's duty classification means: load spectrum, number of working cycles, the ISO and FEM group systems, and how to read a rating off a datasheet.

A crane datasheet carries a group classification alongside its capacity, and the two together state what the machine is designed to do rather than merely what it can pick up. The classification combines a utilisation class, derived from the number of working cycles over the design life, with a load spectrum class describing how heavy those cycles are on average relative to the rated load.

The full article will explain the two systems in circulation and the relationship between them: the ISO 4301 series, whose current edition uses a cycle-based method with load spectrum classes, and the older time-based groups that ISO used until 1986 and that still appear in service literature. The European FEM system and the American CMAA system carry equivalent but not identical scales, and the correlation between them is approximate rather than exact.

It will show why the same crane carries different group ratings at different capacities, which is the point most readers miss: a grab crane classified at the top of the duty scale at its grab rating drops a group when rated for hook work, because the duty assumption changes. The classification drives the fatigue design of the structure and the sizing of the mechanisms, so it is the number that predicts where a crane will crack.