Document of Compliance for Carriage of Dangerous Goods
The Document of Compliance under SOLAS II-2/19.4 and IMSBC 4.8.3: the construction-date thresholds, the class 6.2 and class 7 carve-out, and why an MHB-only cargo does not trigger it.
The Document of Compliance for the carriage of dangerous goods certifies that a ship’s construction and equipment meet the requirements of SOLAS regulation II-2/19 for the classes of dangerous goods it intends to carry. It is issued or endorsed by the flag Administration or a recognized organization acting for it, and a port State control officer will ask for it before a dangerous goods parcel is worked.
The full article will cover the applicability thresholds at IMSBC 4.8.3: cargo ships of 500 gross tonnage and over constructed on or after 1 September 1984, and cargo ships under 500 gross tonnage constructed on or after 1 February 1992, subject to SOLAS regulation II-2/19.4, with class 6.2 and class 7 excepted. It will cover the equipment the document attests to, including the ventilation requirements at II-2/19.3.4, the protective clothing and self-contained breathing apparatus at II-2/19.3.6, the A-60 insulation standard at II-2/19.3.8, and the electrical equipment standards in IEC 60092-506 and IEC 60092-352.
It will also cover the distinction that catches most bulk carrier operators. SOLAS regulation VII/7 defines dangerous goods in solid form in bulk by reference to IMDG coverage, so a cargo classified only as materials hazardous only in bulk, such as coal or direct reduced iron, does not trigger the document, while a Class-carrying Group B cargo such as SULPHUR UN 1350 does.