High Heat Input Welding of Hull Steel
High heat input welding of hull structural steel over 50 kJ/cm: the optional manufacturer approval of IACS UR W11, heat affected zone toughness and tests.
High heat input welding is welding with a heat input over 50 kJ/cm, used for thick plates in shipbuilding. IACS UR W11 covers the steels approved for it: Appendix B in Rev.9 and clause 1.5 in Rev.10, where manufacturers optionally select approval.
The full article will cover the processes, the heat affected zone toughness and the approval tests. The higher tensile steel article covers the steel grades now.