Hot Work on Ships
The hot work permit regime aboard ship: the zero percent LFL criterion, the fire watch, adjacent space checks, and the at-sea and shipyard variants.
Hot work aboard ship covers welding, burning, grinding and any other operation producing a flame, spark or surface hot enough to ignite a flammable atmosphere. It is governed by a stricter permit than an entry permit and by a different acceptance criterion: IACS Recommendation No. 72 Rev.4 section 3.3.5 records that non-explosion-proof equipment may be used in a confined space only where the space is certified safe for hot work or safe for workers and the lower flammable limit is measured to 0 percent.
The full article will set out the hot work permit and its relationship to the enclosed space entry permit under MSC.581(110) 5.3, the fire watch and its duration after work stops, the requirement to test adjacent and connected spaces as well as the space being worked, the isolation of fuel and cargo systems, and the differences between hot work at sea, hot work alongside, and hot work in a repair yard where a shoreside certification regime applies.
The United States overlay is distinct: 29 CFR 1915.14 requires hot work certification by a Marine Chemist or a Coast Guard authorized person, in the categories Safe for Workers, Safe for Hot Work and Enter with Restrictions.