Hydraulic bolt tensioning on marine engines
How hydraulic jacks tighten cylinder cover studs, stay bolts, main bearing studs and holding-down bolts on marine diesel engines, and the safety rules for the tools.
Hydraulic bolt tensioning tightens a stud by stretching it directly with a hydraulic jack, running the nut down while the stud is held stretched, and releasing the pressure so the stud keeps its load. On Everllence (MAN B&W) two-stroke engines the cylinder cover studs, the stay bolts and the holding-down bolts are all tightened this way.
The method replaces torque tightening because thread and nut-face friction absorbs most of an applied torque and varies from stud to stud. With a jack, the preload follows from jack pressure and piston area. The pressure for each joint is engine-specific and is given in the maker’s instruction manual and on the tool.
The full article will cover the jack principle and tool sets, the tightening sequence where jacks are fewer than studs, checking and lowering, stud elongation, tool inspection and the personnel safety risk MAN addressed in SL2004-435, and the joints on each engine that use the method. See cylinder cover design and cooling and engine bedplate construction.