IACS UR L5: Onboard Stability Software, Types 1 to 4

IACS UR L5 Rev.4 (June 2020) sets the types, tolerances, test conditions and approval of onboard stability software for ships contracted from 1 July 2005.

IACS Unified Requirement L5, Computer Software for Onboard Stability Calculations, Rev.4 of June 2020, sets the requirements for stability software on ships contracted for construction on or after 1 July 2005; its note 4 applies the Rev.4 changes from 1 July 2021. It defines four software types by what they check, from intact stability only to safe return to port. Its Table 1 sets the accuracy tolerances against approved data, for example ±5 cm on cross curves and ±5% or 5 cm on GZ, whichever is greater.

The full article will cover the four types, the approval of the software and the hull model, the test conditions, the relation to MSC.1/Circ.1229 and the 2008 IS Code Part B Chapter 4, and the note that onboard stability software is “not a requirement of class”. The cross curves of stability article covers the data the software checks.