ILO Convention 152: Occupational Safety in Dock Work

The 1979 dock work convention governing testing, thorough examination and certification of ship and shore lifting gear, and its relation to the 2026 SOLAS regime.

ILO Convention No. 152, the Occupational Safety and Health (Dock Work) Convention, was adopted at the 65th session of the International Labour Conference on 25 June 1979 and entered into force on 5 December 1981. It revises Convention No. 28 of 1929 and Convention No. 32 of 1932. Articles 21 to 27 are the lifting-gear articles, and they set the five-year retest interval and the twelve-month thorough examination that the industry worked to for four decades.

The full article will work through those articles individually: the prohibition on loading beyond the safe working load, the testing duty and its triggers, the annual thorough examination and certification by a competent person, the pre-use inspection of loose gear by a responsible person, the register requirement, the mutual recognition scheme between ratifying states, and the marking rules, which treat ship’s derricks differently from every other appliance.

It will also place the convention against SOLAS regulation II-1/3-13, in force since 1 January 2026. The two now overlap rather than compete: the convention binds its ratifying states and gives port states a route to stop unsafe gear that is independent of the port state control deficiency codes, while certificates issued under it before 2026 are the main way an existing appliance demonstrates SOLAS compliance.