Landed Cost and Import Duty: The Full Delivered Cost

Landed cost built line by line: WTO customs value on a CIF or FOB basis, the HS code duty rate, import VAT on the duty-inclusive base, brokerage and delivery.

Contents21 sections

Landed cost is the total cost of an imported good delivered into the buyer’s own warehouse: the goods value, international freight, cargo insurance, customs duty assessed on the customs value fixed under the WTO Agreement on Implementation of Article VII of GATT 1994, import VAT or GST on the duty-inclusive base, clearance and brokerage, and inland delivery. It is the only figure that should feed a pricing or margin decision.

The invoice is the smallest number in the transaction. A factory quotes USD 48,000 for a container of goods, and a buyer who prices off that figure has miscounted, because duty is a function of two independent decisions that the invoice does not record: the classification that sets the rate, and the valuation that sets the base. Those two decisions are governed by different instruments, administered by different parts of the same customs authority, and resolved on different evidence. Get either one wrong and the number is wrong.

This article is the hub for the customs and landed-cost cluster. It builds the stack line by line, states the valuation rules that fix the dutiable base, names the instrument behind each jurisdiction’s choice of CIF or FOB, and works the arithmetic to the cent on both bases. It sits alongside Incoterms explained, which decides which party in the sale bears each of these lines, and ocean freight cost and surcharges, which prices the freight that often feeds straight into the dutiable value. The freight figure itself is the rate multiplied by the chargeable weight, so on a CIF basis a volumetric-weight error inflates the duty and the import VAT as well as the transport invoice. The chain that delivers the goods to the customs entry is covered in freight forwarding and Incoterms.

What landed cost is, and the order the charges stack

Landed cost is a sum, and the discipline is in not dropping a term and not adding them in the wrong order. The charges do not simply accumulate: several are computed on a base that already includes the ones beneath them, so the sequence changes the total even when every rate is right.

Start with the goods value, the price actually paid or payable to the supplier, normally the figure on the commercial invoice. Add the international freight from the load port or the seller’s premises to the import gateway. Add the cargo insurance premium that covered the goods in transit. Those three are the CIF value, and in most of the world the CIF value is the base duty is calculated on.

On top sits the customs duty, a tax the importing state charges on goods crossing its border. For the great majority of tariff lines it is ad valorem, a percentage of the customs value, and the rate comes from the tariff schedule indexed by the goods’ Harmonized System classification and by the country the goods originate in. After duty comes the import VAT or GST, charged in most regimes on the customs value plus the duty plus any excise, so the consumption tax lands on a duty-inclusive base. Then the operational charges: customs brokerage and entry filing, port and terminal handling charges, any merchandise-processing or harbor fee the state adds, and the inland haulage that delivers the box to the door.

Two further lines appear on a minority of imports and can dwarf the headline duty when they do. Anti-dumping and countervailing duties are trade-remedy charges layered on specific products from specific origins where an investigation has found injurious dumping or subsidy, and they sit on top of the normal tariff. Excise duty applies to a defined set of goods, usually alcohol, tobacco and energy products, and is often a specific charge per liter or per unit rather than a percentage. A landed-cost model for a wine or a steel import that ignores these understates the cost by its largest single component.

The cost-stack ledger

The table below reconciles each line against the four questions that decide where it lands. It is this site’s own synthesis, built from the instruments cited through this article rather than lifted from any single source, because no one instrument answers all four columns for all ten rows.

Line itemWho pays under an FOB saleIn the customs value on a CIF basisIn the EU import VAT baseRecoverable
Goods valueBuyerYesYesNo
International freightBuyerYes, to the place of introductionYesNo
Cargo insuranceBuyerYes, to the place of introductionYesNo
Buying commissionBuyerNo, excluded by UCC Art 72(e)NoNo
Customs dutyBuyerNot applicableYes, under Art 86(1)(a)Rarely
Excise dutyBuyerNot applicableYes, under Art 86(1)(a)Rarely
Anti-dumping or countervailing dutyBuyerNot applicableYes, under Art 86(1)(a)No
Import VAT or GSTBuyerNot applicableNot applicableUsually, by a registered business
Brokerage and entry feeBuyerNoNoInput tax on the service only
Inland delivery at destinationBuyerNoYes, to the first place of destination, under Art 86(1)(b)Input tax on the service only

Three rows are worth reading twice. Freight is inside the dutiable value on a CIF basis and is therefore taxed by the duty rate even though it is not the goods. Duty is inside the import VAT base, so the tax compounds on it. And inland delivery is outside the customs value but inside the EU import VAT base, which is the line most landed-cost sheets miss entirely.

Permanent cost against cash-flow cost

Duty and import VAT are paid in the same transaction and belong in different rows of a margin analysis. Customs duty is rarely recoverable: once paid it is a sunk cost embedded in the goods. Import VAT paid by a registered business is normally recoverable as input tax against the VAT charged on its own sales, so it is money out at import and back on the next return.

That distinction drives how a serious importer models the stack. A consumer or a non-registered importer who cannot recover the VAT bears it as a real cost, which is why a cross-border consumer purchase feels the tax more sharply than a commercial import of the same goods at the same rate.

Formula

Landed cost

$$L = C + F + I + D + T + S \qquad D = d \cdot CV \qquad T = t \cdot (CV + D)$$

where

\(L\)Landed costcurrency
\(C, F, I\)Goods cost, international freight, insurancecurrency
\(CV\)Customs value: \(C+F+I\) (CIF basis) or \(C\) (FOB basis, e.g. US)currency
\(d\)Duty rate for the HS classificationfraction
\(T, t\)VAT/GST and its rate, on \(CV + D\) in most jurisdictionscurrency / fraction
\(S\)Brokerage, fees, inland deliverycurrency

Source: WTO Agreement on Implementation of Article VII of GATT 1994 (customs valuation); WCO Harmonized System (the classification driving the duty rate)

The customs value: the WTO Agreement on Implementation of Article VII of GATT 1994

Ad valorem duty is a percentage of a value, so the value has to be defined the same way in every member country. The instrument that fixes it is the WTO Agreement on Implementation of Article VII of the General Agreement on Tariffs and Trade 1994, the Customs Valuation Agreement, in force since 1 January 1995 and binding on every WTO Member. Its preamble states that the system should preclude the use of arbitrary or fictitious customs values and should rest on criteria consistent with commercial practices. That is why the valuation logic below is recognizable whether the entry is filed in Rotterdam, Los Angeles or Singapore. The full treatment of the Agreement sits in its own article; what follows is what a landed-cost sheet needs from it.

Article 1: transaction value, and the four conditions

The primary method, carrying the overwhelming share of world trade, is the transaction value: the price actually paid or payable for the goods when sold for export to the country of importation, adjusted under Article 8. The price is the total payment made by the buyer to the seller, or by the buyer to a third party for the seller’s benefit, and it includes all payments made as a condition of the sale.

Transaction value is disqualified on four grounds, and only four. Article 1.1(a) excludes it where restrictions on the disposal or use of the goods apply, other than restrictions imposed by law, geographical resale limits, or restrictions that do not substantially affect value. Article 1.1(b) excludes it where the sale or price is subject to a condition or consideration whose value cannot be determined. Article 1.1(c) excludes it where proceeds of a subsequent resale accrue to the seller and cannot be adjusted under Article 8. Article 1.1(d) excludes it where the buyer and seller are related and the relationship influenced the price.

Article 1.2: related parties, and the three test values

Relatedness alone does not defeat transaction value. Article 1.2(a) says so in terms: the circumstances of the sale are examined, and the value is accepted unless the relationship influenced the price. Where customs considers it did, it must communicate its grounds to the importer and give a reasonable opportunity to respond, in writing on request.

Article 1.2(b) gives the importer three test values to rebut with, each taken at or about the same time: the transaction value in sales to unrelated buyers of identical or similar goods, the Article 5 deductive value of identical or similar goods, or the Article 6 computed value. Article 1.2(c) confines these to comparison. A test value establishes that the declared price is acceptable; it cannot itself become the customs value.

Article 8: what is added, and what is left out

Article 8.1 brings in costs that form part of the goods’ value but may sit outside the invoice line. Article 8.1(a) adds commissions and brokerage, expressly excluding buying commissions, together with the cost of containers treated as one with the goods and the cost of packing, labour and materials.

Article 8.1(b) adds assists: materials, components and parts incorporated in the goods; tools, dies and moulds used in their production; materials consumed in production; and engineering, development, artwork, design work, plans and sketches undertaken elsewhere than in the country of importation. Article 8.1(c) adds royalties and licence fees the buyer must pay as a condition of sale. Article 8.1(d) adds the value of any part of the proceeds of a subsequent resale, disposal or use of the goods accruing directly or indirectly to the seller. Article 8.3 requires objective and quantifiable data for every addition, and Article 8.4 forbids any addition not provided for in Article 8.

The exclusions matter as much. In the European Union, Union Customs Code Article 72 keeps out post-entry transport, post-entry construction and technical assistance, financing interest meeting three conditions, charges for the right to reproduce the goods in the Union, buying commissions, import duties and other Union charges payable by reason of import or sale, and distribution or resale payments that are not a condition of the sale for export.

Articles 2 to 7: the secondary methods, in order

Where transaction value cannot stand, five methods follow in a fixed sequence, and an administration moves down only when the method above cannot be used.

  1. Article 2, identical goods. The transaction value of identical goods sold for export to the same country at or about the same time.
  2. Article 3, similar goods. The same test applied to similar rather than identical goods.
  3. Article 5, deductive value. Working back from the price at which the imported goods are sold in the country of importation, deducting commissions or the usual additions for profit and general expenses, transport and insurance incurred within the country of importation, Article 8.2 costs where appropriate, and the customs duties and national taxes payable by reason of importation or sale. Where there is no sale at or about the time of importation, Article 5.1(b) allows the earliest date after importation but within 90 days.
  4. Article 6, computed value. Building the value up from the cost or value of materials and fabrication, plus the profit and general expenses usual for goods of the same class or kind sold by producers in the country of exportation for export to the country of importation, plus the Member’s Article 8.2 costs. Article 6.2 bars any Member from compelling a non-resident to produce accounts.
  5. Article 7, the fall-back method. A value derived by reasonable means consistent with the principles of the Agreement and Article VII of GATT 1994, on data available in the country of importation.

Article 4 carries the one reversal in the sequence. The order of Articles 5 and 6 is reversed at the request of the importer, never at the discretion of the customs officer. The European Union expresses the same right in Union Customs Code Article 74(1) and the United States in 19 U.S.C. 1401a(a)(2). It protects an importer who can document production cost more readily than resale margins, or the reverse.

Articles 11, 13, 16 and 17: the importer’s procedural rights

Four provisions decide what happens when customs and the importer disagree, and none of them is optional.

Article 11 gives a right of appeal without penalty, to the importer or any other person liable for the duty, and requires each Member’s law to provide appeal to a judicial authority even where the first step is internal. Article 13 requires that the importer be able to withdraw the goods against a surety, deposit or other appropriate instrument while the final determination is pending. Article 16 gives a written explanation of how the customs value was determined, on written request. Article 17 preserves the administration’s right to satisfy itself as to the truth or accuracy of any statement or document presented, and the Committee Decision on cases where customs has reasons to doubt sets out how that right is exercised: further explanation is requested, grounds are communicated, a reasonable time to respond is allowed, and the final determination is given in writing with its reasons.

CIF or FOB: the basis, and the instrument that sets it in each jurisdiction

The Valuation Agreement fixes how the goods value is determined and deliberately leaves each Member to decide whether freight and insurance to the frontier enter the dutiable value. Article 8.2(a) to (c) is that fork: each Member shall provide in its own legislation for the inclusion in, or exclusion from, the customs value of transport to the port or place of importation, the associated loading, unloading and handling charges, and insurance. CIF valuation and FOB valuation are therefore both fully compliant, and the same shipment at the same headline rate carries different duty in two territories for that reason alone.

The European Union on CIF

Union Customs Code Article 71(1)(e) adds the cost of transport and insurance of the imported goods, and the loading and handling charges associated with that transport, up to the place where the goods are brought into the customs territory of the Union. A container of goods worth EUR 40,000 with EUR 3,000 of freight and EUR 200 of insurance carries duty on EUR 43,200, not on EUR 40,000.

The place of introduction is defined rather than assumed. Article 137(1)(a) of Implementing Regulation (EU) 2015/2447 makes it, for goods carried by sea, the port where the goods first arrive in the customs territory of the Union. Separate rules in Article 137(1)(b) to (e) cover the French overseas departments, sea carriage followed by inland waterway without transhipment, rail, road and inland waterway, and other modes.

Through-freight beyond that port is apportioned, not guessed. Article 138(1) apportions the cost in proportion to distance up to the place of introduction, unless the declarant evidences what the cost would have been under a standard schedule of freight rates to that place. Article 138(2) routes air transport costs through Annex 23-01, and Article 138(3) values free or buyer-provided transport at the normal schedule of freight rates.

The United States on FOB

19 U.S.C. 1401a(b)(4)(A) defines the price actually paid or payable as the total payment exclusive of any costs, charges or expenses incurred for transportation, insurance and related services incident to the international shipment of the merchandise from the country of exportation to the place of importation in the United States. International freight and insurance are outside the customs value. The deductive-value provision at 1401a(d)(3)(A)(ii) corroborates it by deducting those same costs.

This is a base difference, not a rate difference. The same container entering the United States at the same headline rate carries duty on the goods alone, and the freight and insurance escape duty entirely.

Canada on the place of direct shipment

Canada is neither straightforwardly CIF nor straightforwardly FOB, which is why grouping it with the United States is a common error. Customs Act section 48(5)(a)(vi) adds transport, loading, unloading, handling and insurance costs up to the place within the country of export from which the goods are shipped directly to Canada, and section 48(5)(b)(i) deducts those costs from that place to Canada. The foreign inland leg is in; the international leg is out.

What the basis is worth

On a high-value, low-freight cargo the basis is a rounding difference. On a heavy, cheap product shipped a long way it is the largest single variable in the duty line, because the freight bill can rival the goods value and the whole of it is taxed under CIF valuation and none of it under FOB. An importer comparing two destinations has to know each one’s valuation rule before computing duty at all.

Classification: the Harmonized System and the rate it points at

Before a value can be taxed the goods need a rate, and the rate is found by classification. The Harmonized System is the World Customs Organization’s product nomenclature, established by the International Convention on the Harmonized Commodity Description and Coding System, in force since 1 January 1988. 163 states and customs unions were Contracting Parties as of 18 August 2025, with the European Union counted as one, and the nomenclature is applied by more than 200 countries and economies. The WCO states that over 98 percent of merchandise in international trade is classified in HS terms. Those two figures measure different things: treaty parties, and economies applying the nomenclature.

HS 2022 today, HS 2028 from 1 January 2028

HS 2022, the seventh edition, is the edition in force in 2026, applying since 1 January 2022. Complementary amendments accepted by Council Recommendations of 25 June 2020 and 24 June 2021 entered into force on 1 January 2023 and 1 January 2024.

HS 2028, the eighth edition, has been accepted and enters into force on 1 January 2028. It carries 299 sets of amendments and produces a nomenclature of 1,229 headings and 5,852 subheadings. Against HS 2022 that is six headings and 428 subheadings created, and five headings and 172 subheadings deleted. Named changes include a new heading 30.07 for vaccines for human medicine and 30.08 for other vaccines including veterinary, both carved out of heading 30.02; a new heading 21.07 for dietary supplements with new legal Notes; and a restructured heading 39.15 distinguishing hazardous plastic waste, waste subject to prior informed consent and other plastic waste along Basel Convention lines.

The revision cycle is normally five years. The seventh review cycle, which produced HS 2028, ran from July 2019 to June 2025 and was exceptionally extended to six years because of the COVID-19 pandemic. A classification settled under one edition can move heading at the next, so an importer holding a ruling needs to know which edition it was issued against.

Chapter, heading, subheading, and the national extension

The structure is hierarchical and the first six digits are common worldwide. The first two digits are the chapter, the first four the heading, and the full six the subheading, which is the finest level identical across all HS members. From the seventh digit each country extends the code for its own tariff and statistics.

The European Union’s Combined Nomenclature runs to eight digits under Council Regulation (EEC) No 2658/87 of 23 July 1987, which Union Customs Code Article 56(2)(a) names as the first component of the Common Customs Tariff, with TARIC carrying the further Union subdivisions. The United States Harmonized Tariff Schedule runs to ten. The worldwide six-digit subheading is the shared spine; the national eight or ten-digit code is what points at a duty rate.

The General Interpretative Rules

Classification is governed by legal text, not by judgment. The six General Rules for the Interpretation of the Harmonized System are published with the nomenclature and decide every contested assignment.

RuleWhat it decides
GIR 1Classification is determined by the terms of the headings and any relative Section or Chapter Notes. Section, Chapter and sub-Chapter titles are for ease of reference only
GIR 2(a)Incomplete or unfinished articles with the essential character of the complete article, and articles presented unassembled or disassembled
GIR 2(b)A reference to a material includes mixtures or combinations of that material, resolved through GIR 3
GIR 3(a)The heading giving the most specific description is preferred
GIR 3(b)Mixtures, composite goods and retail sets are classified by the component giving them their essential character
GIR 3(c)Where 3(a) and 3(b) fail, the heading occurring last in numerical order among those equally meriting consideration
GIR 4Goods not classifiable above go to the heading for the goods to which they are most akin
GIR 5(a) fitted cases and containers presented with their goods; (b) packing materials and containers
GIR 6Subheading comparison at the same level, mutatis mutandis under GIRs 1 to 5, with subheading Notes prevailing

The WCO also publishes Explanatory Notes as the authoritative interpretation of each heading, and the Harmonized System Committee resolves classification disputes between members. A misclassification is not a clerical slip: it changes the rate, can trigger underpaid duty and penalties on entries already filed, and on a remedy-affected product can move the goods in or out of an anti-dumping order.

Ad valorem, specific and compound duties

Most tariff lines are ad valorem, a percentage of the customs value. A substantial set, concentrated in agriculture, food, beverages and some raw materials, carry specific duties: a fixed charge per physical unit, per kilogram, per liter or per head. A specific duty is indifferent to the price of the goods, so a cheap and an expensive shipment of the same tonnage pay the same.

Some lines are compound, combining an ad valorem percentage with a specific charge, and some apply the higher or the lower of the two. On a specific or compound line the customs value matters less to the duty and still drives the import VAT base, so it cannot be ignored. A landed-cost model has to read the duty type from the tariff line rather than assume every rate is a percentage.

Locking the classification in advance: binding rulings and their limits

An advance ruling fixes the classification before the goods move, and every WTO Member owes one. Trade Facilitation Agreement Article 3.1 requires each Member to issue an advance ruling in a reasonable, time-bound manner on a complete written request, and to notify any refusal in writing with its reasons. Article 3.2 permits refusal where the question is already pending or decided before a tribunal or court. Article 3.3 requires validity for a reasonable period unless the law, facts or circumstances change, and Article 3.4 permits retroactive revocation only where the ruling rested on incomplete, incorrect, false or misleading information.

The European Union implements this through Binding Tariff Information. Union Customs Code Article 33(3) makes a BTI valid for three years from the date it takes effect. It binds customs as against the holder only for goods whose customs formalities are completed after that date, and binds the holder from notification, with Article 33(4) placing the burden on the holder to prove that the declared goods correspond in every respect to those described.

Article 34 is the part that catches importers out. A BTI ceases to be valid before its three years where a nomenclature amendment or a Commission classification measure under Article 57(4) makes it non-conforming, effective from the date that amendment or measure applies. Article 34(7)(a) requires revocation where the decision becomes incompatible with Combined Nomenclature Explanatory Notes published in the Official Journal or with a judgment of the Court of Justice. Article 34(3) forbids retroactive cessation, Article 34(4) annuls a decision based on inaccurate or incomplete applicant information, and Article 34(6) means a BTI can never be amended, only revoked and applied for again.

A ruling covers classification. It does not fix the customs value, does not settle origin, and does not protect against a trade remedy imposed after it was issued.

Import VAT and GST: the tax on the tax

The base for import VAT is the duty-inclusive value in the European Union and in Canada, so the consumption tax compounds on the customs duty. This is legislated, not administrative practice, and a sheet that applies both rates independently to the goods value understates the cash due at the border.

The European Union

Directive 2006/112/EC Article 85 sets the taxable amount on importation as the value for customs purposes, determined under the Union provisions in force. Article 86(1)(a) adds taxes, duties, levies and other charges due outside the Member State of importation and those due by reason of importation, excluding the VAT itself. That is the provision that makes the customs duty taxable.

Article 86(1)(b) then adds incidental expenses, including commission, packing, transport and insurance, up to the first place of destination within the Member State of importation, plus those to a further destination in the Community where that destination is known at the chargeable event. Article 86(2) defines the first place of destination as the place named on the consignment note or other import document, and failing that the place of the first transfer of cargo in the Member State. Article 87 excludes early-payment discounts and price discounts or rebates obtained at the time of importation.

The practical consequence is that the EU import VAT base is wider than the customs value by two separate additions: the duty, and the inland leg to the first place of destination. Most landed-cost sheets capture the first and miss the second.

Canada

Excise Tax Act section 215(1) builds the GST base on the value for duty determined under the Customs Act, plus all duties and taxes payable under the Customs Tariff, the Excise Act 2001, the Special Import Measures Act, that Act or any other law relating to customs. Because Canada’s value for duty excludes the international leg under Customs Act section 48(5)(b)(i), the Canadian GST base on the same shipment is narrower than the EU VAT base, even at an identical rate. Two regimes that both describe themselves as taxing the duty-inclusive customs value are taxing different values.

Deferment and postponed accounting

Release of the goods and payment of the duty are not always the same event. Trade Facilitation Agreement Article 7.3 requires Members to allow release before the final determination of duties, taxes, fees and charges, against a guarantee where appropriate, and the European Union expresses the same rule in Union Customs Code Article 195(1).

A duty deferment account lets an importer accumulate customs duty and import VAT through an accounting period and settle the total as one payment, rather than paying per entry as it clears. In the United Kingdom, customs duty and import VAT deferred in a calendar month are paid as a single sum after that month closes; excise duty runs on a different cycle, from the fifteenth of one month to the fourteenth of the next with payment on the twenty-ninth. The effect on landed cost is purely timing: the duty is the same amount, and the importer holds the cash longer.

Postponed import VAT accounting changes the tax line rather than its timing. Instead of paying import VAT at the border and reclaiming it on the next return, a registered importer declares and reclaims it on the same return, so for a fully recoverable position no VAT cash crosses the border. This is the cleanest illustration of why duty and import VAT get different treatment in a margin model: the import VAT can wash to zero cash and zero cost for a registered business, while the duty remains a paid, unrecoverable cost on every consignment.

Low-value consignments: the de minimis position in 2026

A de minimis threshold is a value below which an import clears free of duty, free of import tax, or both, because assessment and collection would cost more than the revenue. The mechanism is stable and the numbers are not: the two largest markets both removed their general low-value duty relief in the eighteen months to September 2026.

There is no multilateral obligation behind any of it. Trade Facilitation Agreement Article 7.8.2(d) asks Members to provide a de minimis value to the extent possible, and its final sentence puts internal taxes such as VAT and excise, applied consistently with Article III of GATT 1994, outside the provision entirely. No Member is obliged to exempt import consumption tax on a low-value parcel.

The European Union

Council Regulation (EU) 2026/382 of 11 February 2026 deleted Chapter V of Title II of Regulation (EC) No 1186/2009, which had relieved consignments of intrinsic value up to EUR 150. The deletion applies from 1 July 2026. Recital 2 of the amending Regulation states that maintaining the relief had left the door open for systematic abuse through undervaluing and artificially splitting consignments.

Article 2 puts a transitional customs duty of EUR 3 per item in its place, from 1 July 2026 until 1 July 2028, on a consignment of intrinsic value not exceeding EUR 150, where either the importation is VAT-exempt under Article 143(1)(ca) of Directive 2006/112/EC because the Import One Stop Shop is used, or the goods are in a postal consignment as defined in Article 1(24) of Delegated Regulation (EU) 2015/2446. Article 3(1) requires the Commission to assess trade diversion by 1 October 2026 and monthly thereafter, and permits it to propose extending the EUR 3 charge to all goods in consignments under EUR 150.

The import VAT side moved five years earlier. Council Directive (EU) 2017/2455 of 5 December 2017 eliminated the EUR 22 import VAT exemption with effect from 1 July 2021, while the customs duty relief below EUR 150 was maintained at that time.

The United States

The USD 800 exemption in 19 U.S.C. 1321(a)(2)(C) is suspended indefinitely and repealed prospectively. Executive Order 14324 of 30 July 2025 suspended duty-free de minimis treatment for all countries from 29 August 2025, following Executive Order 14256 of 2 April 2025, which had suspended it for low-value imports from the People’s Republic of China from 2 May 2025.

Customs and Border Protection then suspended the exemption under its own authority. Its rule for merchandise arriving through all modes other than the international postal network took effect on 24 June 2026, and its rule for mail shipments, with a new postal informal entry process, on 24 July 2026. CBP states that it acts under 19 U.S.C. 1321(b) and would have done so in the absence of any executive order, so the suspension does not depend on the tariff orders surviving.

Public Law 119-21, enacted 4 July 2025, terminates the exemption outright with effect from 1 July 2027 at section 70531(b). The statutory cap had moved from USD 1 in 1938 to USD 5 in 1978, USD 200 in 1993 and USD 800 in 2016 before it was suspended.

The United Kingdom, Canada and Australia

The United Kingdom relieves customs duty on non-excise goods worth GBP 135 or less imported into Great Britain, and excise goods pay duty at any value. At Autumn Budget 2025 on 26 November 2025 the government announced removal of that relief from March 2029 at the latest. A consultation ran from 26 November 2025 to 6 March 2026, its outcome and draft legislation for the Finance Bill 2026-27 were published on 13 July 2026, and no commencement date has been set. The relief is in force as of September 2026.

Canada operates a split threshold under the Courier Imports Remission Order, set out in Canada Border Services Agency Memorandum D8-2-16 of 15 November 2024. Goods shipped from anywhere other than the United States or Mexico are remitted where the value for duty is CAD 20 or less. Goods shipped from the United States or Mexico have customs duties remitted up to CAD 150 and sales and excise taxes up to CAD 40, which is the CUSMA commitment. Goods merely transshipped through those countries without entering their commerce revert to CAD 20, and alcohol, cannabis, vaping and tobacco products are ineligible throughout.

Australia operates a low value threshold of AUD 1,000, below which duty and GST are not collected at the border, with GST on low-value imported goods collected instead at the point of sale by suppliers, redeliverers and electronic distribution platforms.

Facilitation instruments that shape the clearance you get

Three instruments decide how quickly goods move and what an importer can rely on, and none of them sets a rate.

The Revised Kyoto Convention, the International Convention on the Simplification and Harmonization of Customs Procedures as amended, entered into force on 3 February 2006 and had 140 Contracting Parties as of 23 October 2025. Its General Annex binds every party; the Specific Annexes are accepted chapter by chapter, and that acceptance is uneven, with per-chapter totals running from 30 to 54 and some carrying reservations. An importer cannot assume a given Specific Annex chapter applies in a given country.

The WTO Trade Facilitation Agreement entered into force on 22 February 2017, inserted into the Marrakesh Agreement by the Protocol of Amendment adopted on 27 November 2014. Its operative articles for an importer are Article 3 on advance rulings, Article 4 on appeal or review, Article 7.1 on pre-arrival processing, Article 7.2 on electronic payment, Article 7.3 on separating release from the final determination of duties, Article 7.7 on trade facilitation measures for authorized operators, and Articles 7.8 and 7.9 on expedited and perishable shipments. The WTO recorded a global implementation rate of commitments of 89.6 percent as of 11 September 2026, at 92.4 percent for developing Members and 72.3 percent for least-developed countries.

The WCO SAFE Framework of Standards, in its 2025 edition, carries the Authorized Economic Operator programme in its Customs-to-Business pillar, alongside the Customs-to-Customs and the customs-to-other-agencies pillars. The 2025 edition added cooperation with environmental authorities, inclusion of micro, small and medium enterprises in AEO programmes, a requirement that AEOs adopt a code of conduct on ethics, and treatment of insider threats. AEO status buys priority treatment and mutual recognition rather than a lower rate, and the World Customs Organization maintains the framework alongside the nomenclature.

Clearance mechanics: the entry, the importer of record, and the liability

Duty and import tax are assessed against a customs declaration filed by the importer of record, the party legally responsible for declaring, classifying and valuing the goods and paying the charges. The liability for an error sits with the importer of record, not with the broker who filed the paperwork. An undervaluation, a misclassification or a wrong origin claim falls on the declarant.

In the United States the importer of record files a cargo release and then an entry summary, and 19 CFR 142.12(b) requires the entry summary documentation, with estimated duties attached, within 10 working days after the time of entry. The clock runs from the time of entry, not from release from CBP custody, and the two are routinely different dates. In the European Union the equivalent is a customs declaration lodged electronically before release.

The exposure does not close at release. Union Customs Code Article 103(1) permits a customs debt to be notified up to three years after it arose, and Article 103(2) extends that to between five and ten years where the debt arose from an act that was, at the time it was committed, liable to give rise to criminal court proceedings. A post-clearance audit three years after a shipment cleared is the ordinary case, not the exception.

The brokerage line is the fee for getting this right. A customs broker prepares and files the entry, computes the duty and tax, and interfaces with the customs system as the importer’s agent. The fee is usually a flat charge per entry plus add-ons for extra tariff lines, other-government-agency filings or special procedures. The clearance step also carries timing cost: goods sit in a bonded area or a container yard until the entry clears, so a classification query or a valuation hold becomes a daily storage and container demurrage charge the sheet never planned for.

Trade remedies are separate lines, not a higher rate

An anti-dumping or countervailing duty does not replace the most-favored-nation rate. It is assessed as a second charge on the same customs value, at the rate in the order for that exporter and that origin, so a landed-cost sheet showing one duty line for a remedy-affected product is understating the bill. Non-preferential origin, not the preference certificate, decides whether the order catches the goods.

Anti-dumping duty

The Agreement on Implementation of Article VI of GATT 1994 governs. Article 11.3 terminates a definitive anti-dumping duty not later than five years from its imposition, or from the most recent review covering both dumping and injury, unless an expiry review initiated before that date finds continuation or recurrence likely. Orders are routinely renewed, so five years is a review trigger rather than an expiry an importer can plan around.

Three further provisions carry commercial weight. Article 9.1 makes the lesser-duty rule permissive, not mandatory: it states only that it is desirable that the duty be less than the margin where a lesser duty would remove the injury. The European Union applies a lesser-duty rule; the United States does not, and charges the full margin. Article 10.6 allows a definitive duty to reach goods entered for consumption up to 90 days before provisional measures applied, on a finding of a history of injurious dumping and massive imports in a short time, so a shipment booked during an open investigation carries a contingent liability the invoice does not show. Article 5.8 sets the de minimis margin at less than 2 percent of the export price, with volume negligible below 3 percent of imports of the like product unless such countries collectively exceed 7 percent.

Countervailing duty

The Agreement on Subsidies and Countervailing Measures runs in parallel with different numbers. Article 11.9 sets the subsidy de minimis at less than 1 percent ad valorem, not the 2 percent that applies to a dumping margin, and a sheet that uses one floor for both is wrong. Article 19.4 caps the duty at the amount of the subsidy found to exist, calculated per unit of subsidized product. Article 19.2 carries the same permissive lesser-duty wording as the Anti-Dumping Agreement, and Article 21.3 the same five-year sunset.

Safeguards

A safeguard applies to every origin rather than to named exporters, which is why switching supplier country escapes an anti-dumping order and does not escape a safeguard. Under the Agreement on Safeguards, Article 7.1 limits the initial period to four years and Article 7.3 caps the total, including every provisional period and extension, at eight years. Article 6 limits a provisional safeguard to 200 days and requires the duty to be promptly refunded if the investigation does not confirm injury. Article 9.1 exempts a developing-country Member below a 3 percent import share, provided such Members collectively stay at or below 9 percent.

Excise and the specific-charge lines

Excise duty applies to a defined set of goods, in most systems alcohol, tobacco and energy products, and is usually a specific charge per liter or per unit rather than a percentage. It enters the import VAT base in the European Union under Article 86(1)(a) of Directive 2006/112/EC. A percentage-only landed-cost model applied to a wine or a fuel import will miss the largest line on the sheet.

Origin decides two different things under two different instruments

Origin answers two separate questions, and conflating them is the most expensive error in this article’s subject. Preferential origin decides whether a free-trade agreement gives you a reduced or zero rate. Non-preferential origin decides whether an anti-dumping order, a countervailing duty, a safeguard, a quota or an origin-marking rule catches the goods at all. A shipment can hold a valid preferential certificate under one agreement and still owe an anti-dumping duty assessed on its non-preferential origin.

What the WTO Agreement on Rules of Origin actually covers

Article 1.1 of the Agreement on Rules of Origin defines rules of origin as non-preferential only, expressly excluding rules related to contractual or autonomous trade regimes granting tariff preferences beyond GATT Article I. Article 1.2 lists the uses: most-favored-nation treatment under GATT Articles I, II, III, XI and XIII; anti-dumping and countervailing duties under Article VI; safeguards under Article XIX; origin marking under Article IX; discriminatory quantitative restrictions and tariff quotas; government procurement; and trade statistics.

Preferential origin receives only the non-binding Common Declaration in Annex II. The Harmonization Work Programme in Article 9, which was to produce a single harmonized non-preferential regime with the World Customs Organization, has never been completed, so the transitional disciplines in Article 2 remain the operative law and every free-trade agreement writes its own product-specific rules.

The three origin-conferring tests

Article 2 of the Agreement constrains how a rule may be written, which is why the same three forms appear in every agreement. Where change of tariff classification is the criterion, the rule must clearly specify the subheadings or headings addressed. Where an ad valorem percentage is used, the method of calculating it must be stated. Where a manufacturing or processing operation is prescribed, the operation conferring origin must be precisely specified.

In practice that produces a change of tariff heading test, where non-originating inputs must shift classification through processing in the partner country; a regional value content test, where a minimum percentage of value must be added there; and a specific process rule for particular goods. A product assembled in a partner country from inputs sourced elsewhere may or may not qualify depending on the rule written for its heading in that agreement.

The agreements a practitioner meets

The Regional Comprehensive Economic Partnership was signed on 15 November 2020 and entered into force on 1 January 2022, with fifteen parties: Brunei Darussalam, Cambodia, Indonesia, Lao PDR, Malaysia, Myanmar, the Philippines, Singapore, Thailand, Viet Nam, Australia, China, Japan, the Republic of Korea and New Zealand. India withdrew in November 2019 and is not a party. Individual parties acceded to the agreement in force on later dates than the general entry into force, so the applicable date is the destination party’s own.

The Comprehensive and Progressive Agreement for Trans-Pacific Partnership was signed at Santiago on 8 March 2018 and entered into force on 30 December 2018. It now has twelve parties: the eleven original signatories, Australia, Brunei Darussalam, Canada, Chile, Japan, Malaysia, Mexico, New Zealand, Peru, Singapore and Viet Nam, plus the United Kingdom, whose Protocol of Accession entered into force on 15 December 2024.

Self-certification and what a failure costs

A certificate of origin issued by a chamber of commerce and a self-certified declaration of origin carry the same duty saving and a different risk profile. Self-certification shifts the evidential burden rather than reducing it: the exporter or importer makes the statement and the customs authority verifies afterwards, usually by writing to the exporter through the partner authority. Where the exporter cannot produce the supporting records, the preference is withdrawn and the duty is assessed retroactively on the importer, who is the debtor. In the European Union that assessment can be made up to three years after the debt arose under Union Customs Code Article 103(1), and between five and ten years where the debt arose from an act liable to criminal proceedings.

Duty relief and deferral: what changes the number, and what changes the date

Relief regimes fall into two families, and confusing them misstates a business case. Suspensive and relief procedures change how much duty is ultimately paid. Deferment changes only when it is paid. The first affects margin; the second affects working capital.

Inward processing, outward processing and drawback

The European Union has no general duty-drawback regime, and a landed-cost model built on the assumption that it does will forecast a refund that does not exist. The functional equivalent is inward processing under Union Customs Code Articles 256 to 258, which suspends the import duty and commercial policy measures on goods processed and re-exported, rather than refunding duty already paid. Repayment and remission are available in the defined cases at Articles 116 to 121. Most EU free-trade agreements also carry a no-drawback rule barring drawback or suspension on non-originating materials where preferential origin is claimed for the finished good, so drawback and preference are frequently alternatives rather than cumulative.

The United States regime is a genuine refund. Under 19 U.S.C. 1313 and 19 CFR Part 190, the refund will not exceed 99 percent of the duties, taxes and fees paid on the imported merchandise (19 CFR 190.21). Substitution drawback requires merchandise classifiable under the same eight-digit HTSUS subheading (19 CFR 190.22), and manufacturing drawback requires the article to be exported or destroyed within five years after importation of the duty-paid merchandise.

Outward processing under Union Customs Code Articles 259 to 262 works the other way, allowing Union goods to be temporarily exported for processing and reimported with relief on the exported content. Article 260 gives total relief for goods repaired free of charge, and Article 261 operates a standard exchange system under which a replacement product must share the same eight-digit Combined Nomenclature code, commercial quality and technical characteristics.

Customs warehousing and free zones

Goods in a customs warehouse are under a suspensive arrangement, so the customs debt crystallizes on release for free circulation rather than on arrival. Union Customs Code Articles 237 to 242 govern, with Article 240 distinguishing a public warehouse open to any person from a private warehouse reserved to the authorization holder, and Article 238 imposing no general limit on the storage period. In the United States, 19 CFR 19.1 sets eleven classes of bonded warehouse, from the importer’s private warehouse at Class 2 through manufacture in bond solely for exportation at Class 6.

A free zone defers duty until goods leave for free circulation and avoids it entirely on goods re-exported. EU free zones sit at Union Customs Code Articles 243 to 249. The United States runs foreign-trade zones under the Foreign-Trade Zones Act of 18 June 1934, 19 U.S.C. 81a to 81u, with CBP rules at 19 CFR Part 146. The status election decides the rate: privileged foreign status, applied for on CBP Form 214 before manipulation or manufacture under 19 CFR 146.41, freezes the classification and rate at admission, while non-privileged foreign status leaves the rate to be set on withdrawal, which is what delivers the inverted-tariff saving where the finished good carries a lower rate than its inputs.

Temporary admission and the ATA Carnet

Temporary admission relieves duty on goods entering for a defined purpose and leaving again. Union Customs Code Article 250(2)(c) requires the holder to be established outside the customs territory, Article 251(2) caps the period at 24 months for the same purpose and holder, and Article 251(4) sets an overall ceiling of 10 years.

The international instrument is the Convention on Temporary Admission, done at Istanbul on 26 June 1990, with the Secretary General of the World Customs Organization as depositary. Article 24 requires a Contracting Party to accept Annex A and at least one other Annex; Annex A covers temporary admission papers, Annexes B.1 to B.9 cover categories from exhibition goods and professional equipment to humanitarian goods, Annex C covers means of transport, Annex D animals, and Annex E goods with partial relief. The international guarantee chain is administered by the International Chamber of Commerce and its World Chambers Federation, with carnets issued by national guaranteeing associations. A carnet covers multiple countries for up to a year with no deposit lodged with customs.

The United States equivalent for a single country is temporary importation under bond, under Chapter 98 Subchapter XIII of the HTSUS and 19 CFR 10.31 to 10.40, where 19 CFR 10.37 allows the bond period to be extended for not more than two further periods of one year each, so three years in total.

End-use and returned goods relief

Union Customs Code Article 254 grants end-use relief where goods are released at a reduced or zero rate on account of their specific use, with supervision continuing up to two years after first use for goods suitable for repeated use. Article 203 gives returned goods relief where Union goods are returned within three years and in the state in which they were exported, with Article 203(2) allowing the three years to be exceeded in special circumstances and Article 205 extending the relief to processed products previously re-exported after inward processing.

Duty deferment

A duty deferment account accumulates the charges through an accounting period and settles them as one payment against a guarantee. Union Customs Code Article 111(1) sets the deferment period at 30 days, and Article 111(6) permits a Member State to require payment by the 16th day of the month following a monthly aggregation period. The United Kingdom follows that inherited pattern: customs duty and import VAT deferred in one calendar month are taken by Direct Debit on the 16th of the next month, or the next working day.

Excise runs a different cycle, and treating the two as one is the common modelling error. The excise accounting period runs from the 15th of one month to the 14th of the next, with payment on the 29th of the latter month, or 28 February in non-leap years, or the preceding working day.

Carbon and non-tariff border charges now sit on the sheet

Two EU instruments have moved from the compliance department onto the landed-cost sheet, and both are frequently mis-stated because their adoption, entry into force and application dates are different dates.

The Carbon Border Adjustment Mechanism

The Carbon Border Adjustment Mechanism is established by Regulation (EU) 2023/956 of 10 May 2023, and its definitive regime applies from 1 January 2026. No CBAM certificate can be bought before 1 February 2027, and no surrender falls due before 30 September 2027. For a 2026 import the obligation is authorization, data collection and an accruing liability, not a cash line at the border. That is a materially different landed-cost treatment from customs duty and it must not be collapsed into one.

Regulation (EU) 2025/2083 of 8 October 2025, in force 20 October 2025, simplified the mechanism and changed several of its numbers. Article 20(1) as amended starts certificate sales on a common central platform on 1 February 2027. Article 6(1) as amended sets the CBAM declaration deadline at 30 September each year, first in 2027 for the year 2026, and Article 22(1) sets surrender at the same date. From 2027, Article 22(2) requires a declarant to hold certificates covering at least 50 percent of embedded emissions since the start of the calendar year.

The threshold test is not per consignment. Article 2a exempts an importer whose cumulative net mass of Annex I goods across all CN codes in a calendar year does not exceed the single mass-based threshold, set at 50 tonnes, and Article 2a(4) disapplies it to electricity and hydrogen. One 30 tonne shipment is below the threshold; four are not. The goods in scope under Annex I are cement, iron and steel, aluminium, fertilisers, electricity and hydrogen. The certificate price is derived from EU Emissions Trading System allowance auction prices, which is the same market the EU ETS for shipping draws on.

The EU Deforestation Regulation

Regulation (EU) 2023/1115 on deforestation-free products has been postponed twice, by Regulation (EU) 2024/3234 of 19 December 2024 and Regulation (EU) 2025/2650 of 19 December 2025. As amended, the Deforestation Regulation applies from 30 December 2026 to larger and medium-sized operators, downstream operators and traders, and from 30 June 2027 to natural persons and micro or small undertakings within Directive 2013/34/EU that were established as such by 31 December 2024. The later date does not cover products listed in the Annex to Regulation (EU) No 995/2010, which the Regulation repeals. Due diligence becomes an entry condition rather than a charge, so its landed-cost effect is the cost of the diligence and the risk of a blocked consignment.

The maritime crossing: what enters the dutiable value and what stays out

On a CIF-basis import the ocean freight and the insurance to the place of introduction enter the customs value, and that is not the same as saying every line on the carrier’s invoice enters it. Three tests decide each charge: whether it is a cost of transport to the place of introduction or after it, whether it is charged as part of the carriage, and whether it is separately evidenced and quantified.

Surcharges, and the load-end against discharge-end split

The demand-driven and cost-recovery surcharges are components of the sea freight and travel with it into the CIF value: the bunker adjustment factor, the currency adjustment factor, peak season surcharge and general rate increase, war risk and congestion surcharges, and canal surcharges such as the Suez Canal circulars. The ocean freight cost and surcharges article prices the whole set.

The terminal handling charge splits by end. The load-port charge is a pre-shipment cost of getting the goods onto the ship and is inside the dutiable value. The discharge-port charge is incurred after the goods reach the frontier and falls outside it, as do post-arrival storage, container demurrage and detention, customs examination charges and inland haulage.

That exclusion is conditional on the charges being separately identified. A CIF quote that bundles terminal handling at both ends into one freight figure gives the importer nothing to apportion, and customs will take the undifferentiated number into the value whole. The apportionment has to be bought at the quotation stage, not argued at the entry.

Who is the importer of record, by Incoterm

The Incoterms 2020 rules, published by the International Chamber of Commerce and in force from 1 January 2020, allocate import clearance between the parties. Under EXW, FCA, FOB, CFR, CIF, CPT, CIP, DAP and DPU the buyer clears the goods for import and is the importer of record. DDP is the only rule under which the seller clears for import and pays the duty and, where applicable, the import VAT. Risk under FOB, CFR and CIF transfers when the goods are on board the vessel, which is a different place from the load port and decides who bears a lift-on casualty. The full eleven-rule treatment, including the insurance obligations under CIF and CIP and the DPU rule that replaced DAT in the 2020 edition, is in Incoterms explained; a contract still naming the earlier edition is covered in Incoterms 2010.

The DDP trap, which is a liability problem before it is a VAT problem

A seller not established in the European Union cannot simply elect to sell DDP into it. Union Customs Code Article 170(2) requires the declarant to be established in the customs territory of the Union, and Article 170(3) derogates only for transit and temporary admission declarations, for persons who occasionally lodge a declaration where customs consider it justified, and for persons established in an adjacent country under reciprocity. Release for free circulation is not among the derogations.

The non-established seller must therefore appoint a customs representative established in the Union under Article 18(2), and because a non-established principal cannot be the declarant, that representation is indirect. Article 77(3) then makes the representative the customs debtor in its own name, with the seller jointly liable behind it. A forwarder asked to act indirectly is being asked to assume joint customs-debt liability, and prices it accordingly or declines. The import VAT problem is real and secondary: a seller not established or registered in the destination may be unable to recover the import VAT it pays, turning a recoverable cash-flow item into a cost embedded in the DDP price. The DAP alternative exists precisely because of this, and the ICC’s own guidance in the Introduction to the rules advises a seller owing obligations performable only in the buyer’s country to sell under DAP or DPU instead.

String sales and sales in transit

A string sale is settled against a transferable bill of lading rather than against the cargo, so goods can change hands several times while afloat. The importer of record is fixed by who presents the bill of lading and lodges the entry, not by who first contracted. A sale in transit changes the invoice the broker files without changing the carriage, which is why the customs entry and the commercial chain routinely diverge, and why the question of which sale in the chain is the sale for export is decided on the Article 1 test rather than on the last invoice in the file.

Documents, declarations and the filing clock

The entry is a filing against a deadline, and the maritime deadlines run before arrival rather than after it. The commercial set behind every entry is the commercial invoice and packing list, the bill of lading or sea waybill, and, where a preference is claimed, the certificate or declaration of origin.

The entry summary declaration for a sea import into the EU

Union Customs Code Article 127 requires goods brought into the customs territory to be covered by an entry summary declaration lodged at the customs office of first entry, with the obligation on the carrier and the importer, consignee or any person able to present the goods permitted to lodge it instead. Article 105 of Commission Delegated Regulation (EU) 2015/2446 sets the maritime time limits: containerized cargo at the latest 24 hours before the goods are loaded onto the vessel; bulk or break bulk cargo at the latest four hours before arrival at the first port of entry; and two hours before arrival for goods from Greenland, the Faeroe Islands, Iceland, all ports of Morocco, and ports on the Baltic Sea, the North Sea, the Black Sea and the Mediterranean Sea.

The 24-hour pre-loading rule for containers is the one that binds the commercial chain. It means the data has to be correct at the load port, before the box moves, rather than corrected in transit.

Import Control System 2 carries those filings. Its maritime phase began on 3 June 2024 for carriers, with connection required by 4 December 2024, and house-level filers in maritime and inland waterway traffic followed from 4 December 2024 with connection by 1 April 2025. That second step delivered multiple filing, under which the carrier lodges the master-level declaration and the forwarder lodges the house data, each responsible for its own particulars.

The customs entry

In the United States the entry summary is CBP Form 7501, due with estimated duties within 10 working days after the time of entry under 19 CFR 142.12(b), unless the importer files the entry summary at the time of entry under 19 CFR 142.13, in which case it serves as both. Two ad valorem federal fees attach and belong on the sheet: the merchandise processing fee at 0.3464 percent of the value determined under 19 U.S.C. 1401a (19 CFR 24.23(b)(1)(i)(A)), with minimum and maximum adjusted annually under 19 CFR 24.22(k), and the harbor maintenance fee at 0.125 percent of value on commercial cargo loaded or unloaded from a commercial vessel at a listed port (19 CFR 24.24(a)). The harbor maintenance fee is the one US federal charge that attaches specifically to the sea leg, and it does not apply to air or land entries.

A worked landed cost, to the cent, on both bases

The arithmetic below is one consignment priced twice, into the European Union and into the United States, holding every input identical so that the only moving part is the valuation basis. All figures are USD and the rates are illustrative: the real rates come from the destination’s tariff and tax law for the specific HS code and origin.

Inputs

InputUSDNote
EXW price of the goods, 1,200 units48,000.00Price actually paid or payable
Buyer-supplied mould, apportioned to this consignment1,500.00Assist: CVA Art 8.1(b)(ii), UCC Art 71(1)(b)(ii), 19 U.S.C. 1401a(b)(1)(C)
Royalty payable to the seller as a condition of sale1,920.00CVA Art 8.1(c), UCC Art 71(1)(c), 1401a(b)(1)(D)
Buying commission to the buyer’s own agent abroad960.00Not dutiable: CVA Art 8.1(a)(i), UCC Art 72(e)
Inland transport, factory to load port700.00Treated as incident to the international shipment
Ocean freight, load port to port of first arrival2,800.00
Marine cargo insurance premium190.00
Inland haulage, port of import to the consignee’s warehouse950.00The first place of destination on the consignment note
Customs brokerage, one entry250.00Not dutiable
Duty rate4.2 percent ad valoremIllustrative
Import VAT rate20 percentIllustrative

The European Union entry, CIF basis

The customs value under Union Customs Code Articles 70 and 71 is the price actually paid or payable of 48,000.00, plus the assist of 1,500.00, plus the royalty of 1,920.00, plus transport and insurance to the place of introduction of 3,690.00, which is the 700.00 inland leg, the 2,800.00 ocean freight and the 190.00 premium. The buying commission is excluded by Article 72(e). The customs value is 55,110.00 and the duty at 4.2 percent is 2,314.62.

The import VAT base under Directive 2006/112/EC Articles 85, 86(1)(a) and 86(1)(b) is the customs value of 55,110.00, plus the duty of 2,314.62, plus the inland leg to the first place of destination of 950.00: 58,374.62, giving VAT at 20 percent of 11,674.92.

Landed cost for an importer recovering the input tax is 59,584.62. For an importer unable to recover it, 71,259.54.

The United States entry, FOB basis

The customs value under 19 U.S.C. 1401a is the price actually paid or payable of 48,000.00, exclusive of international shipment costs under 1401a(b)(4)(A), plus the assist of 1,500.00 and the royalty of 1,920.00. The buying commission is not an addition. The customs value is 51,420.00 and the duty at 4.2 percent is 2,159.64. There is no federal import VAT or GST. Landed cost is 59,429.64.

Where the difference comes from

LineEU, CIF basisUS, FOB basis
Customs value55,110.0051,420.00
Duty at 4.2 percent2,314.622,159.64
Import VAT base58,374.62Not applicable
Import VAT at 20 percent11,674.92Not applicable
Landed cost, tax recovered59,584.6259,429.64

The duty difference of 154.98 is exactly 4.2 percent of the 3,690.00 of transport and insurance that the EU adds and the United States does not. Nothing else moves, because every other line is identical. The landed-cost difference is the same 154.98 for the same reason.

The compounding inside the EU column decomposes into four pieces: VAT charged on the duty itself, 462.92; VAT charged on the freight and insurance that entered the customs value, 738.00; VAT charged on the duty that the freight itself generated, 31.00; and VAT charged on the inland leg added by Article 86(1)(b), 190.00.

An importer modelling this as goods value times the duty rate, then goods value times the VAT rate, would declare a duty of 2,016.00 and a VAT of 9,600.00 against actual charges of 2,314.62 and 11,674.92. That is an understatement of 2,373.54 on a consignment with an invoice price of 48,000.00, or 4.9 percent of the invoice, and it comes entirely from flattening the stack rather than from any error in a rate.

One assumption in the example is a live practitioner question rather than a settled rule. The foreign inland leg of 700.00 is treated as a cost incident to the international shipment, so it is excluded from the US price actually paid or payable and included in the EU customs value. CBP treatment of foreign inland freight turns on the terms of sale and on whether the goods were sold for export at the factory or at the port.

Comparing sourcing options on a common landed-cost basis

The cheapest invoice frequently loses on landed cost, and the reason is that the duty saving from origin, the freight saving from distance and the valuation-basis effect all sit downstream of the invoice line. A comparison made on goods price alone is comparing the wrong number.

A supplier quoting USD 38,000 from a non-preference origin with USD 4,000 of freight carries duty on a USD 42,000 customs value on a CIF basis. A supplier quoting USD 41,000 from a free-trade partner with USD 1,800 of freight and a qualifying declaration of origin pays nothing at a zero preferential rate, and the lower freight cuts the base as well. At a 6 percent most-favored-nation rate the first supplier’s duty is USD 2,520 and the second’s is nil, so the higher invoice lands cheaper. The same logic drives near-shoring decisions: a higher unit cost closer to market beats a lower unit cost far away once the duty and freight the invoice hides are counted.

Two quotes on different Incoterms are not comparable until both are reduced to the same delivered basis, because one may already include freight, insurance and duty while the other stops at the factory gate. Restate each as goods, freight, insurance, duty at the applicable rate and origin, import tax, fees and inland delivery, then compare per unit. Landed cost also stops at the warehouse door: the inventory carrying cost of the extra weeks on a long route belongs in a total-cost-of-ownership comparison rather than in this one.

Limitations

This article describes the mechanism of landed cost, customs valuation and classification. It does not state the duty rate, the import VAT or GST rate, or the de minimis threshold for any specific product or country, because those are set in each national tariff and each national tax law, change with policy, and depend on the exact HS classification and origin of the goods. Read the destination’s own tariff schedule and tax rules, or obtain a binding ruling, for any real entry.

The worked example uses illustrative rates of 4.2 percent duty and 20 percent import VAT to show the mechanism and the compounding. The arithmetic is correct for those inputs and the inputs are not real rates.

Several points carry practitioner caveats worth stating plainly rather than burying. The CIF and FOB labels are shorthand for specific statutory formulations that differ in detail even between two jurisdictions that both value on CIF, and Canada is neither: it adds transport to the place of direct shipment in the country of export and deducts it from there to Canada. The customs value can involve additions and adjustments, supplied materials, royalties and related-party tests, that a simple goods-plus-freight-plus-insurance figure misses. Classification is interpretive at the margins, and the same product can be argued into more than one heading at different rates, which is why the binding-ruling route exists.

The low-value and unilateral-tariff positions are the fastest-moving material here. The de minimis treatment described is the position as of September 2026 in five named jurisdictions, and three of those were mid-change at that date: the EU transitional EUR 3 charge runs only to 1 July 2028 and the Commission may extend its scope, the US statutory termination takes effect on 1 July 2027, and the UK has announced removal without setting a commencement date. Anti-dumping and countervailing orders open and close continuously, so a product clear of a remedy charge in one year can fall under an order in the next. CBAM certificate obligations do not become a cash line until 2027, and any figure in this article that carries a date should be read against that date rather than against the date it is read.

This article does not cover the Indian, Brazilian or other national import-tax bases, because those provisions could not be verified against their primary texts in the pass that produced it, and an unverified threshold in a landed-cost model is worse than an acknowledged gap.

Frequently Asked Questions (FAQs)

What is landed cost and how does it differ from the invoice price?

Landed cost is the total cost of an imported good delivered into the buyer’s own warehouse: the goods value, international freight, cargo insurance, customs duty, import VAT or GST, clearance and brokerage, any excise or trade-remedy charge, and inland delivery.

The supplier’s invoice normally carries only the goods value, or the goods plus freight under a CIF or CIP sale. Everything after that line is settled with the customs authority, the carrier and the broker rather than with the seller, so the invoice price understates the cost of holding the goods on the shelf.

How do you calculate landed cost per unit?

Build the total first, then divide by the units in the consignment.

Form the customs value on the destination’s basis, apply the duty rate for the tariff line to that value, apply the import VAT or GST rate to the customs value plus the duty, then add brokerage, port and terminal charges and inland delivery. Divide the total by the unit count. Do not divide each line separately and add the per-unit figures: the compounding between duty and import tax is lost if the stack is flattened first.

Is import duty calculated on the FOB or the CIF value?

It depends on the destination, and the difference is in the base rather than the rate.

The European Union adds transport and insurance up to the place of introduction under Union Customs Code Article 71(1)(e), so freight sits inside the dutiable value. The United States excludes costs incurred for transportation, insurance and related services incident to the international shipment under 19 U.S.C. 1401a(b)(4)(A). Both positions are lawful because Article 8.2 of the WTO Valuation Agreement leaves the choice to each Member. On a heavy, low-value cargo shipped a long way, the basis moves the duty bill more than a couple of points of rate would.

Is VAT charged on top of import duty, or on the goods value?

On the duty-inclusive value, in the EU and in Canada.

Directive 2006/112/EC Article 85 sets the EU taxable amount as the value for customs purposes, and Article 86(1)(a) adds duties and charges due by reason of importation while excluding the VAT itself. Canada reaches the same result through Excise Tax Act section 215(1)(b). The compounding is a legislated feature, not an administrative habit, and a landed-cost sheet that applies duty and VAT independently to the bare goods value will understate the cash due at the border.

Does the EU import VAT base stop at the border?

No. Article 86(1)(b) of Directive 2006/112/EC adds incidental expenses, including commission, packing, transport and insurance, up to the first place of destination within the Member State of importation, plus onward transport to a further destination in the Community where that destination is known at the chargeable event.

Article 86(2) defines the first place of destination as the place named on the consignment note, and failing that the place of the first transfer of cargo in the Member State. An EU import VAT figure that stops at the port is understated by the inland leg.

Should I include import VAT in my landed cost if I can reclaim it?

Model it separately, not inside the cost of the goods.

For a VAT or GST registered business the import VAT is normally recoverable as input tax on the next return, so it is a cash-flow item rather than a cost of the item, while the duty is rarely recoverable and is a permanent cost embedded in the goods. Under a postponed accounting scheme the import VAT can be declared and reclaimed on the same return, so no cash crosses the border at all. A model that lumps duty and import VAT together as taxes will misstate both the cash needed at import and the margin on the sale.

Which of the six WTO valuation methods applies, and in what order?

Article 1 transaction value, then Article 2 identical goods, Article 3 similar goods, Article 5 deductive value, Article 6 computed value, and Article 7 the fall-back method.

The order is fixed. A customs administration moves to the next method only when the one before it cannot be used, and an administration that skipped a usable method to reach a higher value would be acting outside the Agreement.

Can I ask customs to use the computed value before the deductive value?

Yes. Article 4 of the Valuation Agreement reverses the order of Articles 5 and 6 at the request of the importer.

It is the importer’s right, not the officer’s discretion. The European Union expresses the same right in Union Customs Code Article 74(1), which reverses points (c) and (d) if the declarant so requests, and the United States in 19 U.S.C. 1401a(a)(2). Developing country Members may reserve against granting it under Article 20.2.

What exactly disqualifies transaction value?

Four conditions, all in Article 1.1.

Restrictions on the disposal or use of the goods beyond the three permitted categories in Article 1.1(a); a sale or price subject to a condition or consideration whose value cannot be determined, under Article 1.1(b); proceeds of a subsequent resale accruing to the seller that cannot be adjusted under Article 8, under Article 1.1(c); and a relationship between buyer and seller that influenced the price, under Article 1.1(d). There are four, not two, and they are enumerable rather than illustrative.

Are buying commissions dutiable?

No. Article 8.1(a)(i) adds commissions and brokerage but excludes buying commissions by name, and the European Union excludes them explicitly in Union Customs Code Article 72(e).

A selling commission incurred by the buyer is a different thing and is dutiable in the United States under 19 U.S.C. 1401a(b)(1)(B). The distinction turns on whose interest the agent represents, so the agency agreement is the document that decides it.

What is an assist and how is it valued?

An assist is a good or service the buyer supplies free or at reduced cost for the production and sale for export of the imported goods, under Article 8.1(b): incorporated materials, components and parts; tools, dies and moulds; materials consumed in production; and engineering, development, artwork, design work, plans and sketches.

The value is apportioned to the imported goods on objective and quantifiable data under Article 8.3. A buyer who ships a mould to the factory and never invoices it has still added to the customs value.

Why is design work done in my own country not an assist?

Article 8.1(b)(iv) covers only engineering, development, artwork, design work, plans and sketches undertaken elsewhere than in the country of importation.

Work done in the importing country falls outside the addition. The European Union wording in Union Customs Code Article 71(1)(b)(iv) is ’elsewhere than in the Union’, so design carried out in a Member State does not enter the customs value of goods imported into the Union.

Are royalties always added to the customs value?

Only where the buyer must pay them, directly or indirectly, as a condition of the sale of the goods being valued, and only to the extent they are not already in the price.

That is Article 8.1(c) and Union Customs Code Article 71(1)(c). Charges for the right to reproduce the goods in the Union are excluded by Article 72(d), and payments for distribution or resale rights that are not a condition of the sale for export are excluded by Article 72(g).

Is interest on a supplier credit dutiable in the EU?

No, provided three conditions in Union Customs Code Article 72(c) are met: the financing arrangement is in writing, the goods are actually sold at the declared price, and the claimed interest rate does not exceed the prevailing level for such transactions in the country and at the time the finance was provided.

Fail any one of them and the interest falls back into the customs value.

Is freight dutiable?

In the European Union, yes, up to the place of introduction, under Union Customs Code Article 71(1)(e), which also brings in insurance and the loading and handling charges associated with that transport.

In the United States it is not, under 19 U.S.C. 1401a(b)(4)(A). In Canada the Customs Act adds transport only to the place of direct shipment in the country of export, under section 48(5)(a)(vi), and deducts it from that place to Canada under section 48(5)(b)(i). Three WTO Members, three different answers, all of them lawful under Article 8.2.

Where exactly is the EU frontier for freight-cost purposes?

For goods carried by sea it is the port where the goods first arrive in the customs territory of the Union, under Article 137(1)(a) of Implementing Regulation (EU) 2015/2447.

Different rules apply to the French overseas departments, to sea carriage followed by inland waterway without transhipment, to rail, road and inland waterway, and to other modes, in Article 137(1)(b) to (e). The port of discharge on the bill of lading is not automatically the place of introduction.

My bill of lading runs to an inland destination beyond the port. How is the freight split?

Article 138(1) of Regulation (EU) 2015/2447 apportions the cost in proportion to distance up to the place of introduction, unless you can evidence to customs what the cost would have been under a standard schedule of freight rates to that place.

Air transport costs follow Annex 23-01, and free or buyer-provided transport is valued at the normal schedule of freight rates under Article 138(3).

Can I get the goods released while customs is still arguing about the value?

Yes. Article 13 of the Valuation Agreement requires Members to let the importer withdraw the goods against a surety, a deposit or another appropriate instrument covering the ultimate duty.

The European Union expresses this in Union Customs Code Article 195(1), which conditions release on payment of the duty or the provision of a guarantee. The goods move; the argument continues.

Customs rejected my declared value. What are my rights?

Article 16 gives you a written explanation of how the customs value was determined, on written request.

Article 11 gives a right of appeal without penalty, and requires each Member’s law to provide appeal to a judicial authority even where the first step is internal. In the European Union, Union Customs Code Article 44 sets out appeal in at least two steps, the second before a higher independent body, and Article 45 allows customs to suspend the decision where there is good reason to believe it is inconsistent with customs legislation or that irreparable damage would result.

Can customs simply refuse to believe my invoice?

Article 17 preserves the administration’s right to satisfy itself as to the truth or accuracy of any statement, document or declaration presented for valuation purposes.

The Committee Decision on cases where customs has reasons to doubt constrains how that right is used: customs asks for further explanation, may conclude the value cannot be determined under Article 1 if doubt remains or no reply comes, must communicate its grounds and allow a reasonable time to respond, and must give the final determination and its grounds in writing.

Which HS edition is in force in 2026?

HS 2022, the seventh edition, in force since 1 January 2022.

HS 2028, the eighth edition, has been accepted and enters into force on 1 January 2028. A classification settled under one edition can move heading at the next, so a tariff line quoted without its edition is incomplete.

What changes in HS 2028?

299 sets of amendments, producing a nomenclature of 1,229 headings and 5,852 subheadings.

Against HS 2022 that is six new headings and 428 new subheadings created, and five headings and 172 subheadings deleted. Named changes include new heading 30.07 for human vaccines and 30.08 for other vaccines including veterinary, both carved out of heading 30.02, a new heading 21.07 for dietary supplements with new legal Notes, and a restructured heading 39.15 distinguishing hazardous plastic waste, waste subject to prior informed consent and other plastic waste along Basel Convention lines.

How often is the Harmonized System revised?

Normally on a five-year cycle. The seventh review cycle, which produced HS 2028, ran from July 2019 to June 2025 and was exceptionally extended to six years because of the COVID-19 pandemic.

One extended cycle is not a change in the norm.

How many countries are bound by the HS Convention?

163 Contracting Parties as of 18 August 2025, with the European Union counted as one party in its own right.

Separately, more than 200 countries and economies apply the nomenclature, and the World Customs Organization states that over 98 percent of merchandise in international trade is classified in HS terms. The two figures measure different things and should never be presented as one.

What do the six General Interpretative Rules actually do?

GIR 1 makes the terms of the headings and any relative Section or Chapter Notes decisive, and reduces Section and Chapter titles to ease of reference.

GIR 2(a) covers incomplete, unfinished, unassembled and disassembled articles. GIR 2(b) extends a reference to a material to mixtures. GIR 3(a) prefers the most specific description, 3(b) classifies composite goods and retail sets by essential character, and 3(c) takes the heading occurring last in numerical order. GIR 4 classifies by closest kinship, GIR 5 covers fitted cases and packing, and GIR 6 applies all of these at subheading level with subheading Notes prevailing. They are legal text, not guidance.

How long does a Binding Tariff Information last?

Three years from the date it takes effect, under Union Customs Code Article 33(3).

It binds customs as against the holder only for goods whose customs formalities are completed after that date, and binds the holder from the date of notification. Article 33(4) puts the burden on the holder to prove that the declared goods correspond in every respect to those described in the decision.

Can a Binding Tariff Information be cancelled early?

Yes. Union Customs Code Article 34(1) ends validity where a nomenclature amendment or a Commission classification measure under Article 57(4) makes the decision non-conforming, with effect from the date that amendment or measure applies.

Article 34(7)(a) requires revocation where the decision becomes incompatible with Combined Nomenclature Explanatory Notes published in the Official Journal or with a judgment of the Court of Justice. Article 34(3) forbids retroactive cessation, Article 34(4) annuls a decision based on inaccurate or incomplete information from the applicant, and Article 34(6) means a BTI can never be amended, only revoked and applied for again.

Does any global rule guarantee an advance ruling?

Trade Facilitation Agreement Article 3.1 requires each Member to issue one in a reasonable, time-bound manner on a complete written request, and to notify a refusal in writing with its reasons.

Article 3.2 permits refusal where the question is already pending or decided before a tribunal or court. Article 3.3 requires validity for a reasonable period unless the law, facts or circumstances change, and Article 3.4 permits retroactive revocation only where the ruling rested on incomplete, incorrect, false or misleading information.

Is there still a duty-free threshold for low-value imports into the EU?

No. Council Regulation (EU) 2026/382 of 11 February 2026 deleted Chapter V of Title II of Regulation (EC) No 1186/2009, which had relieved consignments of intrinsic value up to EUR 150.

The deletion applies from 1 July 2026. Recital 2 of the amending Regulation states that maintaining the relief had left the door open for systematic abuse through undervaluing and artificially splitting consignments.

What replaced the EU's EUR 150 relief?

A transitional customs duty of EUR 3 per item, from 1 July 2026 until 1 July 2028, on a consignment of intrinsic value not exceeding EUR 150, where either the importation is VAT-exempt under Article 143(1)(ca) of Directive 2006/112/EC because the Import One Stop Shop is used, or the goods are in a postal consignment as defined in Article 1(24) of Delegated Regulation (EU) 2015/2446.

That is Article 2 of Council Regulation (EU) 2026/382. Article 3(1) lets the Commission propose extending the EUR 3 charge to all goods in consignments under EUR 150.

Does the United States still have an USD 800 de minimis?

Not in practice. The statutory exemption in 19 U.S.C. 1321(a)(2)(C) is suspended indefinitely: US Customs and Border Protection’s rule for all non-postal modes took effect on 24 June 2026 and its rule for mail shipments on 24 July 2026.

Executive Order 14324 of 30 July 2025 suspended the exemption for all countries from 29 August 2025. Public Law 119-21, enacted 4 July 2025, terminates the exemption outright with effect from 1 July 2027 at section 70531(b).

If the executive orders were struck down, would US de minimis come back?

Customs and Border Protection states that it suspended de minimis under its own authority in 19 U.S.C. 1321(b), and that it would have done so in the absence of Executive Order 14324 or any executive order.

On that stated basis the suspension does not depend on the tariff orders surviving. The statutory termination from 1 July 2027 is independent of both.

Does the United Kingdom still allow GBP 135 in duty-free?

Yes, for non-excise goods, as of September 2026.

Excise goods pay duty at any value. At Autumn Budget 2025 on 26 November 2025 the government announced removal of the GBP 135 customs duty relief from March 2029 at the latest. A consultation ran from 26 November 2025 to 6 March 2026, its outcome and draft legislation for the Finance Bill 2026-27 were published on 13 July 2026, and no commencement date has been set.

What are Canada's courier de minimis figures?

CAD 20 for goods shipped from anywhere other than the United States or Mexico.

For goods shipped from the United States or Mexico, customs duties are remitted up to CAD 150 and sales and excise taxes up to CAD 40, which is the CUSMA commitment. Goods merely transshipped through those countries without entering their commerce revert to the CAD 20 threshold. Alcohol, cannabis, vaping and tobacco products are ineligible. The detail is in Canada Border Services Agency Memorandum D8-2-16 of 15 November 2024.

Does the WTO require a de minimis threshold at all?

Trade Facilitation Agreement Article 7.8.2(d) says Members shall provide one to the extent possible, which is an aspiration rather than an obligation.

Its final sentence puts internal taxes such as VAT and excise, applied consistently with Article III of GATT 1994, outside the provision entirely. No Member is obliged to exempt import consumption tax on low-value goods, and several that waive duty still collect the tax.

Who is liable if the HS code is wrong, me or my customs broker?

The importer of record. The broker prepares and files the entry as your agent, but the declaration is yours, and an undervaluation, a misclassification or a wrong origin claim falls on the party legally responsible for the declaration.

In the European Union a customs debt can be notified up to three years after it arose under Union Customs Code Article 103(1), extended to between five and ten years under Article 103(2) where the debt arose from an act liable to criminal proceedings.

When is the US entry summary due?

Within 10 working days after the time of entry, with estimated duties attached, under 19 CFR 142.12(b).

The clock runs from the time of entry, not from the release of the goods from Customs and Border Protection custody, and the two are frequently different dates because release and final determination of duties are deliberately separated.

Why is my landed cost higher than my broker quoted?

Usually because the quote priced the entry and not the stack.

A brokerage quote covers the fee for filing, plus per-line and other-government-agency add-ons, and it does not carry the duty, the import tax, the terminal charges or the time-driven charges that accrue if the entry is held. A classification query or a valuation hold turns into daily storage and demurrage against a sheet that never planned for it.

What is the difference between landed cost and delivered cost?

Landed cost is the total cost of getting the goods into your own warehouse, including duty and import tax.

Delivered cost usually means the price at which a seller delivers to a named place under the sale contract, which under DDP already contains the duty and import tax and under DAP does not. The two coincide only when the named place is your warehouse and the sale term puts every import charge on the seller.

Is landed cost the same as total cost of ownership?

No. Landed cost ends when the goods reach your warehouse.

Total cost of ownership continues through inventory carrying cost, obsolescence, quality failure, warranty, returns and the working capital tied up over the transit and holding period. A long, cheap ocean route can beat a short, dearer one on landed cost and lose on total cost of ownership once the extra weeks of inventory are financed.

What is the landed cost formula?

Landed cost is the goods cost plus freight plus insurance plus duty plus import tax plus other charges, where the duty is the duty rate applied to the customs value and the import tax is its rate applied to the customs value plus the duty.

The customs value is the goods plus freight plus insurance on a CIF basis, or the goods alone on an FOB basis. The sequence matters more than the arithmetic: forming the customs value first and applying the tax to the duty-inclusive base is what separates a correct sheet from one that understates the border charge.

Does a bonded warehouse reduce my landed cost or just delay it?

It delays the duty and the import tax rather than removing them, and it removes them only in the cases where the goods leave the territory again without entering free circulation.

Goods in a customs warehouse are in a suspensive arrangement, so the customs debt crystallizes on release for free circulation rather than on arrival. For an importer holding stock across a long selling season the benefit is working capital and optionality, not a lower duty rate.

How do I compare two supplier quotes on a common landed-cost basis?

Reduce both to the same delivered basis before comparing anything.

Two quotes on different Incoterms are not comparable as quoted, because one may already contain freight, insurance and duty while the other stops at the factory gate. Restate each as goods, freight, insurance, duty at the applicable rate and origin, import tax, fees and inland delivery, then compare the totals per unit. The supplier with the higher invoice frequently lands cheaper once a preferential rate or a shorter route is counted.

Sources

  1. WTO. Agreement on Implementation of Article VII of the General Agreement on Tariffs and Trade 1994 (legal text) wto.org
  2. Regulation (EU) No 952/2013 laying down the Union Customs Code, Articles 69 to 74 eur-lex.europa.eu
  3. Commission Implementing Regulation (EU) 2015/2447, Articles 137 and 138 (place of introduction, apportionment of transport costs) eur-lex.europa.eu
  4. Council Directive 2006/112/EC on the common system of value added tax, Articles 85 to 87 eur-lex.europa.eu
  5. Council Regulation (EU) 2026/382 of 11 February 2026 eliminating the threshold-based customs duty relief eur-lex.europa.eu
  6. 19 U.S.C. 1401a. Value (section 402 of the Tariff Act of 1930) law.cornell.edu
  7. 19 CFR 142.12. Entry summary documentation, 10 working days after the time of entry ecfr.gov
  8. World Customs Organization. Harmonized System amendments effective from 1 January 2028 wcoomd.org
  9. WTO. Trade Facilitation Agreement, in force 22 February 2017 wto.org
  10. Excise Tax Act (Canada) section 215. value of imported goods for GST laws-lois.justice.gc.ca