MAN B&W ME-GI dual-fuel engine
The Everllence (MAN B&W) ME-GI high-pressure gas injection two-stroke engine: gas supply at up to 300 bar, cover-mounted gas valves, sealing oil and the Mk 2 design.
The ME-GI is the Everllence (MAN B&W) two-stroke engine that burns natural gas by injecting it at high pressure into the cylinder, ignited by pilot fuel, on the diesel cycle. The fuel gas supply raises the gas to 300 bar, which Everllence states is the maximum required pressure at the engine inlet, with a supply safety relief valve at 350 bar and sealing oil held 20 to 25 bar above the gas pressure.
The gas enters through gas injection valves in a slightly modified cylinder cover, with a gas block carrying an accumulator and control valves. On the ME-GI Mk 2 the control and sealing oil is led through bores in the cylinder cover, removing high-pressure pipes.
The full article will cover the engine’s gas supply system and double-wall piping, the gas valve train and leak detection, gas and diesel modes, methane slip against low-pressure engines, and the ME-GI Mk 1 and Mk 2 differences. See cylinder cover design and cooling and WinGD X-DF dual-fuel architecture.