Non-Destructive Testing in Marine Survey and Repair

NDT methods used in ship survey and repair: magnetic particle, dye penetrant, ultrasonic and radiographic examination, when each is required and operator qualification.

Non-destructive testing is how a surveyor establishes the condition of material that cannot be dismantled or sectioned. On ships it decides whether a weld, a casting, a shaft or a length of anchor cable stays in service, and the choice of method follows the defect being looked for and the geometry of the component.

The full article will cover the four methods in routine use: magnetic particle inspection for surface and near-surface defects in ferromagnetic material, dye penetrant for surface-breaking defects in any material, ultrasonic examination for internal defects and for thickness measurement, and radiography for volumetric examination of welds. It will cover where each is specified in class practice, including surface inspection of anchors and examination in way of weld repairs.

It will also cover operator qualification and certification schemes, the reporting that makes a result auditable, and the interpretation problem that makes an unqualified reading worse than no reading at all.