Roll Damping and Bilge Keels

Roll damping sets how fast roll energy dissipates. Bilge keels supply most of it on merchant hulls and appear directly in the stability criteria.

Roll damping is the mechanism by which energy is removed from a ship’s roll motion, and it is the quantity that decides whether a resonant roll grows to a dangerous amplitude or settles at a tolerable one. Unlike heave and pitch, roll has very little wave-making damping at the frequencies that matter, so the damping is dominated by viscous effects: eddy shedding at the bilge, skin friction, lift on the hull and appendages, and the vortex shedding from bilge keels. Bilge keel area also enters the factor k of the weather criterion, set out in intact stability.

Bilge keels supply the largest single contribution on a conventional merchant hull, which is why bilge keel area enters the vulnerability criteria for parametric rolling directly rather than through a general damping coefficient. The standard engineering treatment decomposes total damping into friction, eddy, lift, wave and bilge keel components, an approach developed by Ikeda and colleagues and still the basis of most practical estimates.

The full article will cover each damping component and how it is estimated, the Ikeda method and its range of validity, the roll decay test and the extraction of damping coefficients from it, the nonlinearity of damping with amplitude, and the role damping plays in the second generation intact stability criteria.