Safe Working Load and Proof Load Testing

SWL, working load limit, proof load and test load distinguished, with the test-load tables for lifting appliances and loose gear and the factors of safety on rope.

Safe working load is the maximum static load at a specified radius which a lifting appliance or item of loose gear is certified to lift for a specified operating condition. That definition, from IMO circular MSC.1/Circ.1663, pins two things a plate on a boom does not: the radius and the operating condition. It is why a variable-radius crane carries a load diagram rather than a single number, and why the same crane has different ratings in sheltered and open water.

The full article will tabulate the test loads. For lifting appliances the multiplier steps at 20 tonnes and 50 tonnes rather than running as a single ratio, and the middle band is additive. For loose gear the schedule differs by item class, with single sheave blocks, multi-sheave and hook blocks, hooks and shackles, and lifting beams and grabs each on their own curve.

It will distinguish the four terms readers routinely conflate: safe working load as the appliance carries it in its rigged configuration, working load limit as the manufacturer rates an individual item, proof load as a demonstration of margin that consumes fatigue life, and test load as the specific value a schedule requires. It will also cover the factors of safety applied to wire rope, which fall as the certified load rises rather than staying constant.