Slewing Bearing in Marine Cranes

The large-diameter bearing carrying a crane's vertical load, overturning moment and slewing torque, its wear measurement, bolt preload and marine sealing.

A slewing bearing is the large-diameter rolling element ring that lets a crane rotate while transferring vertical load, overturning moment and slewing torque between the rotating superstructure and the fixed pedestal. It usually carries an integral gear, internal or external, meshing with the slew drive pinion. The common types are the four-point contact ball ring, the crossed roller ring and the three-row roller ring, each with a different moment capacity for a given diameter.

The full article will treat the bearing as a rated component rather than a calendar-life one. Capacity is expressed as a static and dynamic moment envelope, and service life is a function of raceway load cycles against a duty spectrum, so no general figure in years is meaningful. The condemning criterion in service is measured raceway wear, taken as tilting or settlement of the ring under a reference load and trended against the maker’s limit.

It will also cover the routine items that actually decide whether a bearing reaches its rated life: bolt preload and the retorquing schedule, gear tooth lubrication and backlash, and sealing against water ingress, which is the marine failure mode that has no equivalent ashore. Replacement is a shipyard project, and operators commonly align it with a major class survey to consolidate the downtime.