Spade Rudder: Cantilevered Rudder Design and UR S10
The spade rudder, carried only by its stock with no support below the hull, and how IACS UR S10 sizes its stock and bearings for combined bending and torque.
A spade rudder hangs from its rudder stock with no horn, sole piece or pintle below the hull, so the stock and its bearings carry the whole bending moment from the rudder force as well as the torque. IACS UR S10 models it in Annex S10.2, and in Annex S10.3 where the rudder trunk extends down inside the blade, and S10.4.2 sizes the stock for the combined bending and torsion at an equivalent stress of 118/k N/mm2.
The full article will cover the load cases, the trunk-inside-blade arrangement, bearing loads and the size range where a spade rudder gives way to a semi-spade design. The rudder types are compared in rudder and steering systems.