Thermal fatigue in marine engine components

Low-cycle thermal fatigue in cylinder covers, piston crowns, liners and exhaust valve seats of marine diesel engines: mechanism, crack sites and operating causes.

Thermal fatigue is the cracking of an engine component by repeated temperature cycles rather than by a single overload. In the combustion chamber of a marine diesel engine, the gas-side surface of a cylinder cover, piston crown or liner is restrained by the cooler metal behind it, goes into compression when hot, and reverses when the engine stops or unloads.

Each start, stop or large load change is one low-cycle event, with the high-frequency firing cycle on top. Bores that interrupt the cooled wall concentrate the effect: MAN documents cover cracks around the fuel injector pockets, the starting air valve pocket and the indicator bore.

The full article will cover the mechanism, the components and sites affected, the operating causes such as cold starts, rapid loading and cooling water deposits, detection, and the design features that reduce it. See cylinder cover design and cooling and piston crown cooling.