Welding Distortion and Fairing

Welding distortion is the deformation of hull plating and stiffeners caused by weld shrinkage, and fairing is the work that brings it back within tolerance.

Welding distortion is the out-of-plane deformation of hull plating and the bowing of stiffeners caused by the shrinkage of welds as they cool. Fairing is the shipyard work, by heat or mechanical means, that brings the structure back within the fabrication tolerances.

The full article will cover the mechanisms of distortion, the IACS Rec 47 tolerances for unfairness, the methods of fairing, and the effect of initial imperfections on buckling strength. The buckling side is in buckling of ship plating and stiffeners.