Wire Rope Terminations for Lifting Service

The EN 13411 series in full: thimbles, splices, ferrule-securing, resin and metal socketing, wedge sockets and swaging, with their termination efficiency factors.

A wire rope termination is the point where a flexible member becomes a fixed connection, and it is where a rope assembly usually fails. The European standard series EN 13411, “Terminations for steel wire ropes. Safety”, covers the field in eight parts: thimbles, splicing of eyes, ferrules and ferrule-securing, metal and resin socketing, U-bolt wire rope grips, asymmetric wedge sockets, symmetric wedge sockets, and swage terminals and swaging.

The full article will treat each type against its efficiency factor, the proportion of the rope’s own breaking force the termination develops, because that factor rather than the rope’s rating governs the assembly. It will cover the practical failure modes: a wedge socket assembled with the dead end on the loaded side, grips fitted with the saddle on the dead part, a resin socket poured at the wrong temperature, and a swage crimped outside its die range.

It will also correct a common misattribution. ISO 17893:2004 is a vocabulary, designation and classification standard for steel wire ropes and covers no termination at all, though it is frequently cited as though it did.